OneConnect FCoE Initiator (Lancer)
PCI ID 10df:e260 · Emulex Corporation
| Vendor | Emulex Corporation |
|---|---|
| Vendor ID | 10df |
| Device ID | e260 |
| Windows hardware ID | PCI\VEN_10DF&DEV_E260 |
| Linux modalias | pci:v000010DFd0000E260 |
| Linux driver | lpfc |
Frequently asked questions
Which device has PCI ID 10df:e260?
PCI ID 10df:e260 is “OneConnect FCoE Initiator (Lancer)” made by Emulex Corporation (vendor ID 10df, device ID e260).
Which Linux driver supports OneConnect FCoE Initiator (Lancer)?
In Linux kernel 6.12 the device is bound to the driver lpfc (source under drivers/scsi/lpfc). The driver is normally loaded automatically when the device is detected.
How do I check whether OneConnect FCoE Initiator (Lancer) is in my computer?
On Linux, lspci -nn | grep -i 10df:e260 shows the device if it is present. On Windows, open Device Manager, then Properties → Details → Hardware Ids; it appears as PCI\VEN_10DF&DEV_E260.
How do I see which driver is currently in use?
lspci -nnk -d 10df:e260 lists the device with a “Kernel driver in use” line showing the active driver.
Nearby entries
- e131 – LightPulse 8Gb/s PCIe Shared I/O Fibre Channel Adapter
- e180 – Proteus-X: LightPulse IOV Fibre Channel Host Adapter
- e200 – LPe15000/LPe16000 Series 8Gb/16Gb Fibre Channel Adapter
- e208 – LightPulse 16Gb Fibre Channel Host Adapter (Lancer-VF)
- e220 – OneConnect NIC (Lancer)
- e240 – OneConnect iSCSI Initiator (Lancer)
- e268 – OneConnect 10Gb FCoE Converged Network Adapter (Lancer-VF)
- e300 – LPe31000/LPe32000 Series 16Gb/32Gb Fibre Channel Adapter
- f011 – Saturn: LightPulse Fibre Channel Host Adapter
- f015 – Saturn: LightPulse Fibre Channel Host Adapter
- f085 – LP850 Fibre Channel Host Adapter
- f095 – LP952 Fibre Channel Host Adapter